After the back cut has been made, the tree will start to fall.
large tree may be felled against its natural lean by using the boring technique. Use the open-face notch and bore cut the tree to establish the hinge.
But that is not all you need to know, there are safety techniques too.
DO NOT CUT OUT THE BACK. Allow enough backwood to keep the tree secure. Remove the saw from the bore cut and insert wedges tightly into it.
Release the tree from the back.
After the back cut has been made, the tree will start to fall.
Complete the technique by wedging the tree over. This technique is for. FIVE STEP TREE FELLING PLAN Any tree faller should ensure that they follow the five step tree felling plan.
1.
Site assessment > Assess the stand for hazards relating to the trees, terrain, other operations, and power lines. > Assess the strength and direction of the. This item: The Tree Faller's Manual: Techniques for Standard and Complex Tree-Felling Operations by ForestWorks PaperbackIn stock.
Ships from and sold by Book Depository US. To Fell a Tree A Complete Guide to Tree Felling and Woodcutting Methods by Jeff Jepson PaperbackIn /5(51). tree being felled. Make sure the area is clear of people and animals before beginning. Check to be sure the chain saw has enough gas and chain oil to finish felling the tree.
Work behind and slightly to the side of the direction of the fall. The second step is to determine the height of the tree and the direction it should fall.
The tree’s high center of. use a machine to push the tree down (this should be the first choice wherever possible) drive the cut-up tree down (refer to the section on tree driving) fell the tree with the lean (which is now in the opposite direction to the original cuts) Use this sequence to fell the tree in the opposite direction: 1.